YUANFENGPOWER 100W 12V solar panel kit Flexible monocrystalline 18v solar module 10A controller for camper, boat, tent…

Specification:
1. Solar panel
Maximum power (Pmax): 100W
Open circuit voltage (Voc): 21.6V
Short-circuit current (Isc): 6.11 A.
Maximum mains voltage (Vmp): 18V
Maximum power current (Imp): 5.55 A.
Cell material: monocrystalline PERC solar cells
Cell efficiency: 22%
Selection of cells: 36 pieces
Standard test conditions: radiation 1000 W / m2 ， temperature 25 ℃, AM = 1.5
Weight: 1850 g
Size: 1030 * 525 * 3 mm

2. 10A solar controller
Voltage: 12V / 24V
Rated current: 10A
Maximum PV voltage: 40V
Floating charging voltage: 13.7 V / 27.4 V.
Discharge cut-off voltage: 10.7 V / 21.4 V.
Discharge recovery voltage: 12.6 V / 25.2 V.
Standby current: USB output: 5V / 2A max
Working temperature: – 35 ~ 60 ℃
Size: 133 * 70 * 35mm
Weight: 132 g

Packing list:
1 x 100 watt solar panel
1 x 12 V / 24 V 10 A controller
1 x 3 m extension cable with plug (2.5 mm²)
1 x 3 m extension cable with alligator clips (2.5 mm²)

【Flexible】 The solar panel will also be bent by 30 degrees. This can be a good choice for curved surfaces of RVs, boats, sailboats, yachts, trucks, cars, buses, cabins, tents, trailers, golf carts, or other irregular surfaces.
【High efficiency】 Monocrystalline silicon solar cells with 22% high conversion rate, and the total area is smaller with the same performance. Internal diodes can prevent a power failure all the way through the night.
【Durable】 The solar modules resist high wind pressure, snow a lot and extreme temperatures.
【Reliable】 Advanced encapsulation material with multilayer film lamination to strengthen cell performance and for a long life.
【Easy installation】 6 metal reinforced mounting holes on each and every corner for mounting screws and easy installation. The flexible solar panel can be glued in an instant to the surface with silicone adhesive.